SWIMMING POOLS, PRODUCTION, OFFSHORE AND MARITIME
We can help with coating in swimming pools, cruise ships and in manufacturing companies.
We know that ventilation in swimming pools, on ships and in production companies is exposed to conditions that increase the risk of corrosion and shorten the life of the duct. This can be due to both the high salt content in the air and chemical vapors.
As in buildings, the ventilation system on ships is also an important part of the ship's fire protection, because the ventilation can carry fire and smoke around the entire ship. The fire-retardant properties of the coating help to prevent the fire from spreading and contribute to fire protection.
Compared to traditional methods for controlling corrosion in ventilation and fire protection, our Danish-produced solution is cost-effective, as we avoid many of the traditional costs for materials and labor. At the same time, it is a fast method, so daily routines are minimally affected.
The solution can be adapted to both round and square ventilation ducts in different sizes. the coating is flexible and can be used on the surfaces typically found in the ventilation system.
We are a distributor and sole executor in Denmark, with the Danish-produced product from E-AT.
Ventilation ducts exposed to conditions that increase the risk of corrosion. Suitable for environments with chemical vapors in the air. Recommended for use on ships / maritime, as well as production facilities.
PRODUCT FEATURES
Seals leaks and holes in the ducts. Which reduces energy consumption and extends service life
Protects the duct from rust and corrosion by acting as a protective layer. Our solution can also be used in ducts where there is already rust/corrosion
Excellent chemical resistance / resistance to chemical vapors. The coating has been tested in acidic, alkaline and chlorine-containing environments with pH values from 3-12, where no signs of degradation of the coating materials are seen. Tested according to DS / EN ISO 2812-3, 2012
Fire retardant. Almost impossible to ignite and self-extinguishing. Tested cf. the requirements in DS / En 1361-1 2013 and DS428 (fire technical measures in ventilation ducts)
Resistant to impact, high elasticity and self-healing for minor injuries
High adhesion and easy to work with
Dust-repellent
RECOMMENDED FILM THICKNESS
Film thickness:
Wet film ± 355 my
Dry film: ± 200 my
THEORETICAL SKILLS
0,8-1,5 kg/m2
FLASH POINT
Non-flammable, fire retardant
PH RESISTANCE
Good resistance to chemical vapors with pH values from 3 to 12. However, different acids, bases etc. can have different effects on the coatings. Therefore, if one is to be sure, then the coating must be tested specifically against the media to which they will be exposed in the individual application.
VOC
5g/l
TOUCH DRY AT
20° 2 hours