cleaning of ventilation

CLEANING WITH SPECIAL DESIGNED EQUIPMENT

Professional cleaning specialized for use in ventilation

 

Our cleaning robot is special designed for use in ventilation, it cleans both horizontally and vertically.

 

The robot is equipped with a safety wire, control unit and a compressed air hose.

 

The specially developed brushes ensure that the robot delivers a uniform, high-quality result so that the surface is free of flakes, rust, gravel, dust and dirt before any coating.

 

We are using high pressure extraction during celaning, so we are sure that the result is as expected, the exhaust air from our high pressure extraction is filtered with a special H13 HEPA filter.

 

Before and after cleaning we are document with foto and video in our quality assurance program.

 

our equipment is efficient

The robot can be adjusted for use in all kinds of ventilation ducts, rectangular, round, oval, square all the way down to Ø 80 mm.

  • The robot is equipped with a spring system that allows the machine to pass up to 90 degrees of bending at even very small channel dimensions
  • Often possible to clean 30 - 45 meters into the canal, without cleaning flap
  • Cleans up to 5 meters pr. minut (depending on the conditions)
  • Works equally well in vertical and horizontal ventilation ducts
  • Cleaning speed and cleaning power can be adjusted during operation.

 

technical accessories

  • Technical cleaning brushes, round, are available in both metal and plastic.
  • Technical cleaning brushes, square, are available in both metal and plastic.
  • Hard foam rubber stop, round, used to dazzle areas during cleaning.
  • Hard foam rubber stop, square, is used to dazzle areas during cleaning.
  • T-piece (for collecting dust, rust and other) during cleaning.
  • Vi anvender højtryksudsugning under rensning, udstyret med special H13 HEPA på afkast.
  • We are using High pressure extraction during cleaning, equipped with a special H13 HEPA filter.
Contact safe-coating.dk

Advantages of our equipment:

  • Great adaptability. Can be adapted for use in all standard  ducts (rectangular, round, oval, square), from diameter Ø 80 mm.
  • Cost effective, improved performance.
  • Replacement costs of existing ducts, downtime reduces and we reduce the disruption of daily operations.
  • Works equally well in vertical and horizontal ventilation ducts.
  • Documentation. Inspection, recordings and quality assurance.

VIDEO INSPECTION OF VENTILATION

WHAT IS TV INSPECTION WITH CAMERA?

TV inspection camera - also called endoscope - is a small video camera that you can use in places where larger cameras can not get to. Another name for this is inspection camera.

 

The idea of ​​a camera is that one can see and film and document areas that are usually very difficult to access.

The technique is used in the ventilation industry, where an endoscope is used to check the duct system, whether the duct system is in such a condition that a coating is needed to be able to extend the service life or the ducts are so dirty that it requires cleaning to maintain the correct air volumes (cf. legal requirements).

 

A bad or dirty duct system also has a negative impact on energy consumption.

 

There are many applications where inspection cameras can be the first step to uncover any errors etc.

Leveret af